SS316L is a widely used stainless steel in the resource sector, due to its favourable corrosion behaviour and good formability. Studies on SS316L fabricated via PBF and …
Acero inoxidable (SS316L) El acero inoxidable (SS316L) es una aleación de acero con base de níquel-cromo-molibdeno de bajo contenido en carbono que combina una excelente resistencia, una ductilidad alta y unas buenas propiedades térmicas. Gracias a su gran resistencia a la corrosión y a las picaduras, incluida la corrosión química, este
Microstructure and hardness of SS316L-Si deposited by direct laser deposition (DLD) on a conventional SS316L base material are studied. The DLD process produced a crack-free metallic part with a density of ~ 99.5%. The as-deposited samples exhibit a microstructure with millimetre-sized solidified melt pools. They consist mainly of …
Type 316L Stainless Steel Properties. Type 316L stainless steel density is 0.289 lb/in3 (8.0 g/cm3); melting point is 1375-1400 °C (2500-2550 °F); 0.2% yield strength is minimum 25 ksi (170 MPa) in annealed and hot finished condition, minimum 45 ksi (310 MPa) in annealed and cold finished condition; Minimum tensile strength is 70 ksi (485 …
The CTOD measures 0.853 mm, 0.873 mm on the Inconel 825 side and the SS316L side respectively. The test results confirm that both the Inconel 825 and SS316L sides have good fracture toughness.
Crystallographic and nanostructure of the films. Figure 1 shows the XRD patterns of the bare SS316L substrate, as-deposited Mn/SS(316L) and the post-annealed Mn/(SS316L) films with flow of oxygen (250 cm 3 /min) at 673 K temperature, respectively. The diffraction pattern of the as-deposited Mn/(SS316L) film (Fig. 1b), in addition to three …
In this work, a self-developed muti-laser powder bed fusion (ML-PBF) equipment was utilized to produce a series of SS316L samples. A new scan strategy called "variable area scan" was used to investigate the dimensional accuracy, microstructure, defects, surface roughness and mechanical properties of the single-laser PBF samples, …